Mobile single column lift – what is the purchase price?

Mobile single column lift – what is the purchase price? Increasingly, the composition of car workshop equipment includes single-column mobile lifts, which are ideal especially when performing small repairs or seasonal tire changes. In small and confined spaces, they are an excellent alternative to two-column lifts, which take up much more space and do not allow free maneuvering on the workshop surface. What is the cost of buying this type of hoist and what does its price depend on?

Mobile single column lifts – what is worth paying attention to during the purchase?

The single-column mobile lifter will find its application in many mechanical workshops, especially body and paint shops. On sale there are models that allow you to lift one of the sides or the whole vehicle, and during their selection, first of all, check the maximum weight of the load. Another very important aspect is the range of adjustable shoulder length, which will translate into adjusting the lift to the car. The unquestionable advantage of a single column mobile lift is that there is no need for installation to the ground, so it is possible to maneuver on a hard surface. However, it is worth choosing only high-quality jacks, which are characterized by high stability and are equipped with appropriate wheels to facilitate movement.

What is the purchase price of a single column mobile lift?

Bearing in mind the various parameters of mobile single-column lifts for the workshop, their price may vary from 1300 to even 10,000 PLN, however, it should be remembered that the higher the cost of purchase often involves more functionality. On the market you can also find many lifts from Chinese manufacturers, which are much cheaper and sometimes have a high reliability of work – unfortunately, a significant problem is the lack of authorized services and poor availability of interchangeable parts.

Scissor lift, mobile or stationary one?

Scissor lift, mobile or stationary one? The lift is one of the basic devices that is needed for proper car workshop equipment. Different types of lifts work better in different situations. The choice of a particular model also depends on the size of the workshop. Scissor lifts are popular due to the possibility of hiding them in the floor, thanks to which they take up less space. Is it worth to bet on a mobile lift?

Portable equipment for special tasks

Mobile lift, as the name suggests, allows you to use it in various places, depending on your needs. It is therefore ideal for private use, but it will also work well in a professional workshop. Its advantages are: lightness and a relatively low price. However, it does not offer such comfort as a stationary lift. It is also characterized by lower stability.

Stationary lifts

The second type of scissor lifts is permanently mounted in the workshop floor. The big advantage of this solution is stability and the ability to hide it in the floor. The costs of such equipment are, however, higher due to the greater complexity of the structure. This type of lifts is most often used in workshops with a longer period of time – at the beginning of their journey, many people decide to lower costs and puts on mobile equipment, allowing them to leave the room. As the device stabilizes, it is bought with a long-term perspective.

Both mobile and stationary elevators have their advantages and disadvantages. The first of them will work especially in small workshops and will be good at the initial stages of running a business. However, as time passes, it is worth investing in a stationary version, permanently mounted in the floor.

— Conture

Two-column lift 230V or 400V?

Two-column lift 230V or 400V? Two-column lifts are one of the most popular devices of this type, which are located in car workshops. They are valued because of their universality and relatively low price. Choosing the right model is not at all an easy task – often the question raised is the preferred electrical voltage of the device. Is it better to bet on a 230V or 400V motor?

What is the difference?

The 230V voltage is well known from every home. Actually, all smaller devices work in this system. The problem arises as the power of the equipment increases. Then, a larger 400V power supply often enters the game. This does not mean, however, that increased tension brings better or “stronger” action. There are lifts that have the option of choosing between these two options. The same device, powered in two systems will work the same. Differences occur in the type of wire and connectors, as well as in the work station.

What option to choose?

Most two-column lifts have a power above 2 kW. The choice of the preferred supply depends here on the current protection in the installation. Of course, it is easier and more enjoyable to use single-phase power supply, because this option is more popular, and hence – cheaper. However, when starting your own workshop, it is worth thinking about three-phase installation. Then a better choice will be a 400V power lift, which provides greater security and lower network load.

When choosing a two-column lift, everything depends on the preferences and needs of the mechanic. If the workplace does not have 400V connectors, then the first option remains. If, however, it is possible to use three-phase power, it is worth to bet on a stronger and safer installation.

— Conture

How to start a car workshop

How to start a car workshop? This question is being asked quite frequently. Our own car repair shop is the dream of many novice mechanics. However, starting your own business is quite an expensive process. And this is just the beginning of the road – when running a business, you need to find a way to attract customers. What requirements should be met when creating your own workshop and how to encourage people to leave their cars

Beginning – starting a business

The first thing you need to do is register your business. At this point, you can take advantage of numerous programs aimed at co-financing young entrepreneurs. If the workshop is to be located in the town up to 20,000 residents, you can use the Rural Development Program. All EU programs, which often involve local communities, also offer great opportunities, and other times reach a wider circle of clients.

You already have a workshop – and what next?

The beginnings of running any business activity can be difficult. In the case of car mechanics, the first clients are friends and family. In such a situation, whisper marketing works best – good opinion is the basis of success. If the workshop is said to be superlatives, there is a good chance of success. Another thing is that customers must find out that such a company exists. Nowadays an ideal solution is dynamic activity on the website and in social media. Most potential clients (from larger and smaller towns) are looking for help using internet browsers. Therefore, it is worth noting your presence in this way.

The basis of patience

The approach is very important. The time needed to fully open the workshop is sometimes more than 2 years – you need to learn the patience and methods of small steps. Customers do not come right away, however online activities and positive consumer feedback can significantly speed up the entire process.

— Conture

How to start a car workshop

Above all, it’s worth considering before it goes into implementation. A very good solution is to write a specific business plan, where we consider all factors affecting the potential popularity and profitability of the workshop. The following should be taken into account potential workshop location. In this case, the closer to the city center, the better, as statistics judge. The proximity to the center will significantly encourage the visitor to travel to the other end of the city. The next factor will be marketing. Without it, it can be relatively difficult, especially at the beginning. It is worth consideringing here all advertising materials such as banners, leaflets, billboards, etc. An investment in strictly online marketing may be a good step. As time passes, brand awareness and knowledge are built, so the beginning is, as in many other matters, the most important.

Potential paths of obtaining funds

Nowadays, when setting up a company, we can apply for many subsidies, either from the state or from the European Union. It is worth a try, at the beginning of the company’s operation it is beneficial to find all the possibilities to minimize costs and maximize profits. Another solution may be taking a loan for a company, many banks offer very favorable offers to start a business.

Opinions – that is, the basis of reputation

The most important thing should always be the client’s good. The satisfied customer will often gladly give a positive opinion to the workshop on the internet. Such activities will significantly help the workshop to exist on the Internet, and a prospective client who sees the proverbial “5/5” or “5 stars” will be much more likely to give his vehicle to such a workshop than one that is not on the internet or has low ratings. A good step towards customer satisfaction will be rebates, loyalty cards or even gadgets obtained during the visit.

The most important thing in the entire business and running of the company is prudence and patience. It is worth every action, be it marketing or financial, think carefully and plan, and the rest of the factors will definitely help in the development of the car workshop.

— Michał N. Adam

Subsidy for a car repair shop, what is important?

The decision to start your own business in the Automotive industry is a step that opens up many possibilities but requires relatively many outlays. The equipment of the workshop costs very much a lot, plus finding and paying for a convenient location and any other costs associated with running your own business. No however, you should break your hands. There are programs that allow you to co-financing of such activity from public funds.

Support with the help of the Local Action Group

One way out that can help you get the funds to open and equipping your own car workshop is to use The Rural Development Program for 2014-2020. The condition is however, operating in a village below 20,000 residents. The minimum value of the entire operation is 50,000. PLN, and the maximum the amount that can be obtained – 100,000 zł. The success of such a conclusion depends on meeting different guidelines – young age, employment people on a contract of employment (especially seniors and the disabled), presenting your high qualifications. Local Action Group is an institution that will help in obtaining the necessary information and preparation of the application.

Assistance from the European Union

The second solution may be to use the EU program. one must However, it should be noted that the recent acquisition of such funding is becoming more and more difficult – due to more demanding criteria and limited resources. It is difficult to describe a specific program because it is theirs many and new ones are constantly being created in place of old ones. It’s best to follow information on the website of the Provincial Labor Office. Such projects appear in the first quarter of the calendar year. They often concern typically local communities and require residence in the area. Sometimes, the status of an unemployed person is also required. After a long process You can get the coveted funds with a bit of luck when you are recruiting.

A car lift, German or Chinese?

Choosing a car lift is a very important decision when arranging your workshop. The mechanics’ work comfort depends on its operation. Often, in addition to basic decisions about the type of equipment needed and the preferred drive, the question arises whether it is worth trying out cheaper Chinese devices, or is it better to choose widely used German lifts?

Chinese hoists are a good alternative?

At the beginning, it should be noted that the matter is not as simple as it may seem. Chinese devices obviously have a basic advantage – they are much cheaper than their European counterparts. It is not that they are suitable only for the decoration of the workshop. Some equipment from you
The measure turns out to be really reliable and presents good quality. However, the big problem is the lack of the possibility of such verification, which takes place in the case of devices manufactured in the EU. Added to this is the difficulty in obtaining spare parts and the lack of authorized services.

Popular choice – German lifts

If the budget allows it, a much better solution will be to choose world-famous German lifts. The proximity of the manufacturer works in favor of the person using the equipment – you can solve any problems at any time. Most well-known brands have their own services, which is why possible repairs are much more convenient. Added to this is the fact that before buying you can easily consult other mechanics, because such equipment is much more popular. The whole problem comes down to choice – saving or certainty. A Chinese lift can work perfectly without straining the mechanic’s pocket, but there is always the risk of a missed purchase. German equipment gives you more reliability and possible fault repairs.

Author: Conture

Two-column lift, hydraulic or screw?

Two-column lift, hydraulic or screw? Two-column lift is one of the most frequently used equipment of this type in car workshops. It allows for a relatively large range of applications. One of the most important issues when choosing the right device is the preferred drive. Often the first choice among mechanics are screw elevators, also called electric or electromechanical. However, hydraulic drive gains more and more popularity. Which option is better to choose when arranging your own workshop?
Two-column TW 242 G lift

Screw drive – solid construction

The greatest advantage of this type of lift is the simplicity of the structure. Thanks to the uncomplicated construction, parts are rarely damaged, and even in the event of some problems, it is easy to find spare parts and make repairs yourself. However, screw elevators are relatively loud and expensive to operate – the energy is used to power the device throughout its operation.

Hydraulic drive – reliability and convenience of work

Hydraulic lifts also do not have a very complicated construction. The whole mechanism works thanks to oil-powered pumps. Such equipment is quieter and does not consume energy when leaving the vehicle – it simply uses the weight of the vehicle. It is also more stable and works faster than screw models. Lifts with hydraulic drive are also considered more reliable.
When choosing a lift for your workshop, it is worth consulting the experienced mechanics. Despite their habit of electromechanical drive, many of them emphasize the superiority of hydraulic lifts, which are less emergency and are better suited for various applications.

Author: Conture
—

Choosing a lift is a real challenge for the workshop. It is worth equipping the workshop with a jack so that you do not run from and to the channel and that the repairs take place in more comfortable conditions. Depending on what is most needed, we can meet the three main types of lifts. I am talking here about a two-column, hydraulic and screw lift. Each of them has its own advantages and disadvantages, which are worth knowing before we decide to buy.
Versatility, durability or strength

Two-column lifts are very popular, which owe their universality and relatively low price. The whole works on the principle of sliding carts on guides, on which the arms are embedded, which are additionally adjustable in the range of extension length. As a result, vehicles with differently spaced support points can be raised. The price of this solution depends on the type of drive and the possible permissible load capacity. The disadvantage is the lack of access to certain places of the car, e.g. a gearbox. There are also works that we will not be able to do with such lifts (eg wheel geometry).

In this case, we have hydraulic lifts, which are additionally characterized by extremely quiet and fast work and reliability. A big advantage is also a very strong support, thanks to which the lifted car is stable.

However, if we are looking for something that will be able to lift or move large masses, nothing will work better than a screw jack. It operates on the basis of a motor and worm gear. These elevators are also a great choice when you want to pick up speed and the ease of synchronizing drives.
A lift for a small workshop

The task of lifts is to move away from the channel system and to facilitate work. The three types described have their own variations, which may be useful in specific applications. So when looking for a lift for our workshop, it is also good to suggest opinions of other customers, workshops that use a given type of lift.

Author: Grzegorz Pospieszczyk

Two-column lift, hydraulic or screw?

The lift is an important element of the car workshop. Without it, it’s hard to imagine most of the work, so the decision to buy it can not be accidental. It is necessary to think about it, check the offers and choose a device that will fulfill its task over the years.

Before buying – what is important?

The most important thing to think about before you buy a lift is its future destiny. It seems to be a trivial matter, but expectations may be different in each plant. It is important to answer the questions, how much work intensity the lift will have to withstand, what is the range of services proposed by the plant, what premises conditions are available. It is also important to consider which vehicles are most often operated, as work related to passenger cars requires a different lift than works related to several-tonne vehicles.

Two-column lifts are one of the options available in this type of equipment. It is a good option if you need a position for various types of work, without the need to create more for various orders. Among the noteworthy features, the most important thing is the ability to adjust the height of the hoist to the work currently being performed, as well as to increase the employee, which adds to the comfort of work. Thanks to the two pairs of arms, the two-column lift raises the vehicle to the desired height, allowing repair work on the chassis.

Hydraulic jack

Another lift that you can choose is a hydraulic lift. It makes it easier to lift heavy objects when liquid is used, which pushes out one of the parts of the lift causing it to rise. This makes it easier to work on heavy parts that require lifting a part of the vehicle or machine. It can help, but it is less practical compared to a two-column lift.

Screw jack

There are also screw elevators available on the market, which can be used mainly for work with the stage and in the theater. Facilitate the lifting of scenes or rows of seats in the theater by linearly moving the elements and acting like lifting, lowering and pressing devices.

Author: Piotr Michałowski

An important question for every workshop

When organizing a small car workshop, we must take into account the selection of the most important device, which is the lifter. The small amount of space obliges us to make a sensible decision in this matter.

Equipment for a small workshop.

In Poland, a lot of small businesses are created every year. Car workshops also belong to this group. In the case of small companies, the workshop area is the most important. This is a limited place for gathering basic equipment necessary to perform all repairs and inspections of vehicles. There is a huge amount of equipment available on the market that must be found in the car workshop, so the right choice is very difficult for a number of reasons.
Car lifter

A car mechanic must have an appropriate and efficient lift, but before deciding to buy the right one, it is worth considering what to use. The specialization of services is important – it can be vulcanization, sheet metal works or painting. The type of vehicles that will be supported in the workshop is also of significant importance. It is also worth paying attention to the amount of owned housing and solidity of the substrate. The lifts work not only up, but they also put a lot of stress on the workshop floor, lifting vehicles weighing more than a ton. It is also necessary to check the electrical connections under the hoist – they should be three-phase. In a small and narrow room, a high-lift scissor lift will work best. It is an excellent equipment for performing, for example, vulcanization. It has a small size and does not take up much space when folded. The single-column and pneumatic lifts will also be useful. Remember that the wrong lift can not only destroy your premises, but also threaten the health and life of people working with you.

By choosing the right lift for your small workshop and want to avoid unnecessary expenses and troubles, it is best to start by seeking advice from specialists.

– Author: Grzegorz Pospieszczyk

Which lift fits in a small workshop?

A car lift is a basic tool that is needed for vehicle repairs and diagnostics. Today’s devices allow for much more than a workshop channel, and do not require such financial outlays. However, what equipment works best? The choice depends on the needs and available resources. Below we answer the question “what kind of lift should be installed in a small workshop?”.

Types of lifts

There are several basic types of car lifts, each of which has its advantages and disadvantages. The most common is:

• column lifts,
  
• scissor lifts,
  
• punches.

The first of these are in three versions: one, two and four columns. Two columns allow you to release the wheels while lifting the vehicle, making the device suitable for replacing them. The four columns are characterized by the highest stability, but they lift the entire vehicle, together with the wheels. To release them, you need additional small lifts, offered on some models. You can easily carry out the current service, repair and replacement of brakes, suspension or transmission.

Scissor lifts consist of one or two platforms lifted with special levers. They can be hidden in the floor, thanks to which they occupy much less space than their columnar relatives. Some types allow you to release the wheels while lifting the car. In the case of one platform, the whole bottom of the vehicle is hidden, so a more universal choice will be lifts with two platforms.

Stamp lifters are the most expensive devices of the mentioned. However, they offer the best quality and take up the least space. The principle of their operation is based on the piston that emerges from the cassette present under the floor. Depending on the type, it can allow any type of repair.

Drive types

The first type is an electric drive. It gives relatively high stability, thanks to which the weight of the vehicle is well balanced. Such hoists, however, are expensive to maintain. The hydraulic drive is quite cheap and effective. The mechanism is based on the operation of oil-powered pumps. Such lifts are characterized by high speed of operation. The most expensive output is pneumatic drive, which uses compressed air for operation.

What lift for a small workshop?

The best choice for small workshops will be two-column lifts and scissor lifts with two platforms. They are characterized by relatively high universality and allow for the majority of necessary repairs. If the budget permits, it is worth investing in stamp lifters that offer significant space savings. However, the best type of drive will be hydraulic and pneumatic.

– Author: Conture

Which lift to mount in a small workshop?

Many car mechanics are wondering what car jack to choose for a small workshop. Usually, in small workshops, a channel is enough to allow free access to the car while it is being repaired. However, in the long run the channel is not very comfortable for a working car mechanic, because he has to waste time entering and leaving. Therefore, many mechanics are thinking about equipping their workshop with a car lift.

Criteria for choosing a car lift

Choosing a car jack for a small workshop is not easy, because you should consider the planned purchase carefully so that the installation of the device facilitates work in the workshop. When buying a car lift, consider not only how much space we have in the workshop, but also the height of the ceiling. Before buying a lift, you should also consider its reliability and volume at work. An additional factor, apart from the price to be taken into account, is the service and availability of spare parts on the Polish market. Many specialists advise against cheaper Chinese lifts due to difficulties in the purchase of spare parts.

Types of car lifts

The most important question to ask yourself before buying a car lift is what the lift is intended for. Every car mechanic knows the scope of work carried out in his workshop and when buying a lift, one should be guided by the activities we perform and to which the lift is to be used. There is no point in investing in a lift, which works well in repair activities that are not performed in a given workshop or rarely.

Most car mechanics with small workshops are faced with the question of whether to opt for a 4-column or 2-column lift or an overrunning lift. Each of these lifts has its advantages and disadvantages. The main advantage of the 4-column lift is its stability and safety. The mechanic can work without fear that something will go wrong and the car will fall off the lift. Unfortunately, the 4-column lift has its drawbacks. Above all, it is difficult to change the gearbox, as the crossmember of the lift interferes with this. In the case of a 2-column lift, we have some limitations, as some work on the car will not be done on it. In turn, the advantage of a 2-column lift is its small size, thanks to which it does not take up much space in a small workshop. In the case of a 2-column jack, we have hydraulic and screw lifts to choose from. Both hydraulic and screw lifters have their supporters and opponents. The main complaint against hydraulic lifts is less job security.

Selection of the lift due to corrective actions

Many workshop owners decide to buy several lifts that serve various purposes. For small service tasks on cars, a small hydraulic lift is enough. To work on the current service, brakes and suspension, you can use a mobile scissor lift, which raises tires to a height of about 1 meter. When working on the suspension, a 2-column lift is enough. The 2-column lift is mainly used for suspension, transmission, service and brakes. On the other hand, a 4-column lifter will be necessary to work on the clearance check and to set the convergence. In turn, the scissor-operated scissor lift mounted on the duct works well for all repair work except for replacing the fuel filter. Therefore, we choose a jack depending not only on the place in the workshop, but also on the work that is carried out in this workshop.

When buying a car lift for the workshop, many car mechanics are guided by the price. Others, in turn, advise purchase of branded equipment, even in the used version. Many specialists advise the purchase of a brand lift even after regeneration. Due to the safety and reliability of work, many specialists are of the opinion that when purchasing a lift, not to save, but to opt for better quality equipment and a good brand. However, the most important criterion when buying a lift should be the scope of work that we will be using to make it.

– Author: Piotr Michałowski